Lubes/Cleaners

- Evaporates fast and leaves no residue - A "no-scrub" cleaner that cleans to the base and prepares surfaces for application of high-performance lubricants - No water rinsing is required - Clean Streak's No-Rinse, No-Residue formula is perfect for use on disc brake rotors

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts. - Ideal for all conditions - wet, dry, road and trail - High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

Shimano Hydraulic Disc Brake Fluid - Non-corrosive mineral oil that offers excellent heat expansion properties - Mineral oil will not absorb water from the air - Not caustic and is non-toxic

DOT 5.1 brake fluid is compatible with all SRAM and Avid hydraulic disc brakes - Brake Fluid Type: DOT 5.1 - Bottle Size (Brake Fluid): 4 oz - Application (Brake Fluid): Disc Brakes

RockShox's Suspension Oil comes in different weights to match the most popular suspension fork and shock setups.

Rock-N-Roll Absolute Dry lubricant is a super-clean chain lube that picks up little or no dirt. - For road bikes only

Rock-N-Roll Extreme is a very clean lubricant due to its ability to shed dirt and dust. - For mountain bike or wet road riding

Rock-N-Roll Gold lubricant is for both mountain and road bike use. The formulation goes deep down into the chain and traps any dirt. Then, with the energy of the chain freewheeling backwards, the dirt and grit floats to the surface so you can wipe it all off, leaving a new and clean application of lube inside the chain, where it's needed. - All-purpose lube - Cleans and lubricates simultaneously

Park's Anti-Seize Compound reduces friction in threaded and press fit connections for easy assembly and disassembly. It's ideal for bottom brackets, pedal threads, headset cups, seatposts, quill stems and much more. This compound also seals and protects parts from corrosion and rust under the most extreme conditions.

HPG-1 Park Tool High Performance Grease is proprietarily blended to meet the demanding needs of today’s high performance bicycles and high end components. -Superior adherence and extended lubrication life -Extreme temperature range: -20°F to 540°F (-29°C to 282°C) -Highly water resistant -Perfect for high end applications including precision ground and ceramic bearings, pivots and suspension components 4-ounce (113 g) tube

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.

- Specialty high performance assembly grease that excels in a multitude of heavy duty and light duty applications - Delivers unmatched thermal stability and extreme pressure performance - Oil-soluble formulation provides exceptional protection against corrosion, water washout and wear.

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- PLUSH Suspension Oil - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

- “New Bike in a Can” - Restore that factory shine - SC1 high gloss coating is specifically formulated to protect and beautify multiple surfaces including plastic, vinyl, rubber and carbon fiber - Water-resistant formulation is safe for use on gloss or matte finishes and makes the clean-up process easier by forming a durable coating that repels mud, dirt and debris

DOT 5.1 Brake Fluid, 16 OZ Bottle. Viscosity-stable across highest range of operating temperatures.

- Quickly removes grease, oil, and other contaminants from electrical components - Propellant provides maximum spray pressure - Allow hot surfaces to cool before applying - Quick drying, leaves no residue - Safe for most plastics - Citrus scented - VOC compliant

- Designed For Dry, Dusty Conditions - Fast Penetration And Setup - Promotes Smooth Shifting - Waterproof - For Chain Driven Bicycles Only

Finish Line's Mineral Brake Fluid is formulated specifically for bicycle brake systems requiring mineral oil. Features no compromise leading edge chemistry to provide superior fluid life and braking performance. Formulated with a low viscosity base oil to yield superior level response, pad retraction, and consistent performance through a full range of operating temperatures. Finish Line Mineral Brake Fluid was specifically engineered for use in bicycle hydraulic disc brake systems. When you are serious about getting the most out of your braking system, Finish Line Mineral Brake Fluid is a great choice. - Specifically engineered for use in bicycle hydraulic disc brakes - Provides maximum fluid life and braking performance, even at low temperatures - Prevents foaming and overheating

For a clean, smooth-pedaling drivetrain, look no further than Finish Line's Ceramic Wax Lubricant. Its ceramic bonding technology allows you to greatly extend your re-lubing intervals for maximum durability and convenience. In fact, every time you apply the lube, it builds on the ceramic coating and the result is a chain so slippery even dirt has a hard time sticking! Think efficient. Think quiet. Think Finish Line! - With each application the ceramic coating is enhanced, ultimately providing the durability of many oil-based lubricants - No wetness or stickiness so dirt and grime will not be attracted or absorbed by the lubricant - Helps avoid abrasive wear allowing parts to run more smoothly and last longer - As the white ceramic particles embed themselves on the chain they will displace grime, causing a grey or black film to form on top of the wax coating. Over 2-3 applications this will lessen or cease. This discoloration is normal and will not compromise performance.

Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.

Finish Line's DOT 5.1 Brake Fluid is a high-quality fluid for maximum life and braking power. It exceeds the most stringent 5.1 specs and is compatible/mixable with all DOT 3, 4 or 5.1 spec'd systems. It also features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line® Dry Lube is the bicycle industry's original and most versatile dry-style chain lubricant. It is formulated with high-performing nano-ceramic boron nitride. This Non-Stick Ceramic Technology is 100% fluoro-free and sets up with a dry ‘wax-like’ film. It attracts less grime and delivers a low coefficient of friction over long re-lubrication intervals. It is ideal for riding on or off-road, in dry, dirty, dusty environments, and also holds up well in wet conditions. Designed for chain applications, it can also be used on derailleurs, shifters, cables, and brake pivot points. Dry Lube delivers optimum drivetrain efficiency without attracting excessive amounts of abrasive contaminants. • Formulated with Non-Stick Ceramic Technology • Lowers friction, improves pedaling efficiency, reduces wear • Quickly sets up dry and clean • Minimizes the attraction of abrasive contaminants • Low surface tension easily penetrates chain pins • Biodegradable and 100% fluoro-free

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

E-Bike Cleaner is formulated to remove grit and grime from frames, wheels and components of e-Bikes. To ensure a clean e-Bike while not damaging expensive electronic components, Finish Line engineered a clinging foam cleaner that is gentle, noncaustic, leaves no streaks, and requires no water rinsing. Finish Line’s e-Bike Cleaner is an ideal complement to any dealer specializing in e-bike sales and service.

- A biodegradable degreaser that cuts through the toughest grime - Strong enough for the metal parts, Yet safe enough to clean parts with rubber o-rings and seals, urethane elastomers, and painted surfaces - Exceeds all federal V.O.C. and California carbon regulations - Law prohibits ORM-D materials from shipping by air

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.